Hydraulic Weeding Omv 800 Repair Manual

• Certification: CE
• Pressure: Medium Pressure
• Work Temperature: High Temperature
• Voltage: 0
• Installation: Horizontal
• Material: Alloy Steel
• Model NO.: omv 800
• Warranty: 12months
• Delivery: 10-15 Working Days
• Transport Package: Carton Packing, and Finally with Pallet or Wooden
• Specification: omv 800
• Trademark: HANJIU
• Origin: China
• HS Code: 8412291000
• Production Capacity: 500, 000 Sets Per Year

Product Description

Hydraulic weeding omv 800 repair manual
 

Main Specification:

 

Type		OMV 315	OMV 400	OMV 500	OMV 630	OMV 800	OMV 1000
Geometric displacement (cm3 /rev.)		333	419	518	666	801	990
Max. speed (rpm)	cont.	510	500	400	320	250	200
	int.	630	600	480	380	300	240
Max. torque (N·m)	cont.	920	1180	1460	1660	1880	2015
	int.	1110	1410	1760	1940	2110	2280
	peak	1290	1640	2050	2210	2470	2400
Max. output (kW)	cont.	38	47	47	40	33	28.6
	int.	46	56	56	56	44	40
Max. pressure drop (MPa)	cont.	20	20	20	18	16	14
	int.	24	24	24	21	18	16
	peak	28	28	28	24	21	18
Max. flow (L/min)	cont.	160	200	200	200	200	200
	int.	200	240	240	240	240	240
Weight (kg)		31.8	32.6	33.5	34.9	36.5	38.6

 

 

APPLICATIONS:

• Mobile equipment
• Snow Removal, mowing
• Spayer, trencher
• Wood products
• Material Handling Equipment
• Oil & Gas
• Forestry Equipment
• Mining

here some tips before using a hydraulic orbital motors

 

Before starting, check the motor installation, whether the connection is correct and firm, and the system is correct.

Check whether the oil inlet and outlet directions and motor rotation direction meet the requirements of working conditions.

The pressure of the relief valve of the oil supply line is adjusted to the lowest value, and gradually adjusted to the required pressure after operation. Tighten the inlet and outlet pipes and the drain pipe.

 

After running the motor under no load for at least 10 minutes, gradually increase the pressure to the working pressure, and observe whether the motor is running normally at any time during the operation.

 

During operation, the working conditions of the motor and system should be checked frequently. If abnormal temperature rise, leakage, vibration and noise or abnormal pulsation of pressure are found, the machine should be stopped immediately to find out the cause.