| Customization: | Available |
|---|---|
| Function: | Flow Control |
| Installation: | Threaded Cartridge |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic Motor 3 Spool Valves 80 L/Min 12V Electric Hydraulic Control Valve
Manually or mechanically controlled hydraulic directional control valve Р80 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 7 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
ConstructionР80 is a mono-bloc distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
MountingThe distributor is fixed with two bolts M8
| Ambient temperature | -40C...+60C |
| Viscosity | 12 ...800 mm2/s |
| Fluid temperature | -15C...+80C |
| Filtration | 10 to NAS 1638 |
| Max operating pressure | 315 bar |
| Back pressure | 50 bar |
| Nominal flow | 80 l/min |
| Leakage(A,B-T) | 15cm3/min at 120bar |
| Spool stroke | +/-7 mm |
| Actuating force | < 200 N |
| Modification/ Spools | up to 8 |
){kind=link}